FeCo-based hybrid MOF derived active species for effective oxygen evolution

Metal-organic frameworks(MOFs) have been regarded as promising catalyst materials due to the richness of coordinately unsaturated metal sites on the surface,which can act as catalytic active centres.In this study,a hybrid MOF material composed of Fe-based MOF and Co-based MOF was prepared with the involvement of graphene oxide nanosheets as additive.It was demonstrated that the hybrid MOF materials showed much higher electro-catalytic activity towards oxygen evolution than the single-phase counterparts.To drive current density of 10 mA cm~(-2),the hybrid CoFe-based MOF only needed an over potential of 290 mV in 1 M KOH.The catalytic activity could sustain for a longer time with only slight current density decrease.During oxygen evolution operation,the MOF catalyst evolved into catalytic active species but kept well the microscale sheet-like structure.It is thus believed that this study will provide an avenue for the development of advanced electrocatalysts.     

浅谈铁和碱反应

文献［１～６］报道：“铁同强碱不发生作用”．我们用干燥的铁粉和氢氧化钠进行实验．实验证明：铁能跟强碱反应，反应的化学方程式为     

气相Lys分子体系捕获双电子单重激发态的特性

采用密度泛函理论（DFT）中的B3LYP方法, 在6-311+G(2df)基组水平上, 对气相赖氨酸（Lys）分子和Lys^2-的基态稳定构型进行优化, 并用含时密度泛函理论（TD DFT)方法考察气相Lys分子和带电离子体系单重激发态的特性. 结果表明： Lys分子体系捕获双电子时, 其体系能量有所增加； S1单重激发态与S0基态能量差值变小； 分子体系的荧光波长增加； S7单重激发态跃迁轨道数减少.     

Influence of Microstructure and Sintering Routes on Transport Properties of Apatite Materials for Fuel Cells

1 Results Oxy-apatite materials are thought as zirconia-substitutes in Solid Oxide Fuel Cells due to their fast ionic conduction. However, the well known difficulties related to their densification prevent them from being used as such. This study presents strategies to obtain oxy-apatite dense materials and the influence of elaboration route on transport properties. Particular emphasis is put on the microstructure effect on ion conduction. By the combined use of freeze-drying and conventional or spark p...     

漳州某基坑抽水引起地面沉降的初探

由于基坑快速抽水导致基坑周边地面沉降。通过对场地因抽水引起地面沉降的计算和试抽水等方面的前期工作,分析了因基坑降水对地面沉降的影响,并据此来调整完善基坑降水方案,取得了明显的社会和经济效益。     

反渗透系统的设计思路探讨

反渗透作为一种重要的水处理技术,越来越广泛地应用到各种领域,其处理水源也变得复杂多样化,因此要求在反渗透系统和反渗透预处理设计时予以高度关注。本文主要讨论针对不同水源时反渗透系统的设计思路。     

羧基淀粉的制备及其吸附性能的研究

本文研究羧基淀粉的制备条件与吸附重金属离子的容量关系,并研究它的使用条件和性能。     

Zn^2＋在电解还原铕（Ⅲ）过程中的催化行为研究

本文报道微量Zn~(2+)在电解还原铕(Ⅲ)离子过程中的催化作用,研究结果表明:当阴极中含Zn~(2+)时,铕(Ⅲ)离子将缩短到达定量还原的时间,用循环伏安法监控电极过程的结果表明:电极过程是准一级的催化过程。     

离子交换树脂非均相催化酯化合成丙烯酸丁酯

研究了在间歇搅拌釜中以阳离子交换树脂为催化剂，由丙烯酸和丁醇合成丙烯酸丁酯。分别考察了不同类型离子交换树脂的催化酯化作用，并且研究了搅拌速度、催化剂用量以及反应温度对酯化反应的影响。研究结果表明以KNC9型离子交换树脂在373.15-393.15K温度下具有最好的催化酯化作用。     

半导体单晶硅的离子束蚀刻实验研究

离子束蚀刻是一种有超精细加工能力的微细加工技术,广泛应用于微电子、光子技术、表面科学等领域。硅及其化合物常用来制作大规模集成电路,在其表面蚀刻出具有一定几何布图尺寸的沟槽。其深度、宽度、边壁倾角及槽底形状等直接影响器件的性能。